Learn how to install your lighting/appliance or outlet controllers before pairing them with your Xfinity Home system.
What you'll need
- Xfinity Home
- The lighting/appliance or outlet controllers you want to install
Difficulty
Easy
Which controller do you want to install?
Install a lighting/appliance controller
On the side of the controller, hold down the on/off button while you plug the controller into an electrical outlet. If the outlet is controlled by a light switch, make sure the switch is on. Continue holding the button in until the green LED lights up.
When the green LED begins to blink, you're ready to pair the controller to your touchscreen.
Did you know? The outlet on the front of the Controller is always on and isn't controlled by your Xfinity Home system. It functions as a traditional outlet. The outlet on the bottom of the Controller is where you will plug in the light or appliance that you want your system to control.
Installing an outlet controller
Hold down the button on the front of the controller while you plug the controller into an electrical outlet. If the outlet is controlled by a light switch, make sure the switch is on.
When the blue LED begins to blink, you're ready to pair the controller to your touchscreen.
