You can re-program/reset your Xfinity remote to control another TV or audio device by following the steps below.
Note: These instructions apply to XR2, XR5 and XR11 model remotes only. Xfinity remotes can be identified by a model number beginning with "XR" on the back of the remote.
Note: These instructions apply to XR2, XR5 and XR11 model remotes only. Xfinity remotes can be identified by a model number beginning with "XR" on the back of the remote.
Remove TV and audio receiver control
- Press the Setup button on the remote until the LED at the top of the remote changes from red to green.
- Press 9-8-6.
- The LED at the top of the remote will blink green twice to indicate that the remote has been reset.
